Classified Ads

WTB: Driveshaft from any 94-05 (manual)

feeds@yuku.com (lmno) — Mon, 14 Dec 2009 12:39:18 GMT

Hi,

I'm looking for a driveshaft from any 94-05 (manual). Preferably close to Edmonton so I can pick it up.

Act now and get a 90-93 driveshaft for free...

Half a Miata for sale (1993 rear clip as a trailer)

feeds@yuku.com (MX5 Miata Guy) — Mon, 07 Dec 2009 19:26:48 GMT

Not my ad, but unique enough to be hard to resist.

http://toronto.kijiji.ca/c-cars-vehicles-cars-1993-Mazda-MX-5-Miata-TRAILER-Wagon-W0QQAdIdZ171117152

GONE (Nearly) Free to pickup: Full exhaust, clutch, suspension parts off of low mileage 1991

feeds@yuku.com (lmno) — Tue, 01 Dec 2009 12:02:43 GMT

Off of a low mileage (31,000 miles) 1991 US Miata I just bought:

Shocks, springs (all four)
Complete exhaust (including header)
Stock clutch and flywheel

All parts in surprisingly good condition (car is from Texas, it must have never seen rain). Recently removed to be replaced with aftermarket stuff. I hate to see it sit outside until I throw it away some day. I'm much too lazy to ship it, though. So if you can pick it up (I live just outside of Devon,...

FS: Parts -- off 1991 Blue Miata

feeds@yuku.com (abeck) — Wed, 18 Nov 2009 10:05:02 GMT

I have a 1991 Miata (blue) that I am parting out. Lots of stuff available; send me what you want and I'll see if I have it.
- soft top on frame is decent
- hood is good
- 14" OEM aluminum rims (tires shot)
- 14" OEM aluminum rims with good all season Sumitomo's
- lots of interior bits
- lots of mechanical bits
- rear finish panel
etc, etc.

I am located in Ontario, north of Burlington. You can reach me on email:...

Winter Tires For Sale

feeds@yuku.com (enggboy) — Mon, 16 Nov 2009 21:33:29 GMT

I have for sale:

Qty: 4 - Michelin X-Ice winter tires
Size: 175/65-R14

These tires are four years old and were used for three winters, then have been stored for the last one.

They are free of any patches or repairs, and there is about 1/2 of the tread depth left. My guess is that you can easily get another two winters out of them on a heavier car, and three more on a Miata. I don't have pictures yet, but if you are interested I will get you some within a...

Na Miata parts for sale. Mazda Workshop manuels on CD 1.6L,1.8L.

feeds@yuku.com (Mike BRG) — Tue, 10 Nov 2009 16:49:44 GMT

Manuels Shop MAZDA sur CD 90-93,94-97,99-2000,2001-2005 non turbo.
Toit souple de M-2,bleu foncé (SE Titane 2003)ayant eu petite réparation.
Pompe à essence avec le sending unit.
Couvert de valves 1.6 L
Trims intérieurs du pare-brise.
Ignitor,et le petit bidule à vacuum à côté.
Support du reservoir de lave-glaces 2 L US
Air Flow Meter 1.6L
C.A.S 1.6L
Air Bag de volant à 4 branches.
Sensors du système air-bag
Side-markers avant et...

FS: BP, MS and turbo stuff

feeds@yuku.com (krgoodwin) — Mon, 09 Nov 2009 19:30:02 GMT

Hey, going a different direction with my car now so I don't need my turbo stuff.

1.8L 250,xxx km runs but lifters make some noise comes with manifolds, ecu, etc. - $500obo

Megasquirt V3.0, fan control, boost control and IAC control. comes with IAT sensor also oem ecu connector to make wiring easy. - $400obo

1.8L mild steel exhaust flange, sch10 pipe to make a log manifold. I also have TD04 flanges I can throw in too. It's not welded togeather but I can do...

Wtb 1.6 engine

feeds@yuku.com (Kyle) — Sat, 31 Oct 2009 20:35:02 GMT

Hello I'm new to the site and am looking for an engine for my 1990 miata. The current motor is done so I would like find one asap. I am in Edmonton but will ship or travel to pickup. Thanks

coming mid Nov..parting out 90 blue softop miata..GONE

feeds@yuku.com (The Vaginator) — Fri, 30 Oct 2009 10:33:55 GMT

Shell and all parts sold in a bulk deal..to a guy from Edmonton.

To those that wanted parts I apoligize..but the purchaser wanted all the parts..

2005 MSM Differential and Axles for Sale

feeds@yuku.com (05LavaMSM) — Wed, 28 Oct 2009 07:48:42 GMT

I have a 4.10 Bosch Torque Sensing differential from my MSM for sale. It has 45,000 km on it. This unit is different from standard Miata Torsens (NA & NB) in that it needs the MSM axles. The MSM axles are bigger than normal Torsen axles, and therefore stronger. So if you have a non-MSM NA or NB, you will also need the MSM axles. The Torsen comes complete with carrier.
Diff - $1000 CAD
Axles $300 CAD
I am located in Edmonton, Alberta.

PM me or e-mail me at...

NC header for sale

feeds@yuku.com (Red Roadster) — Sun, 18 Oct 2009 09:57:34 GMT

For sale 1 Goodwin Roadstersport Stainless 4-1 header. Fits 2006-2008 miatas About 10000 km of use and is in excellent condition. Pictures available upon request .Asking $325.
shipping not included. I am located in Nova Scotia. email address is arobertson@ns.sympatico.ca.

Thank Andrew

Winter tires on rims

feeds@yuku.com (herbpin) — Wed, 14 Oct 2009 07:59:07 GMT

It's the perfect day in Edmonton to think about winter tires
I have a set of michelin arctic alpin mounted on 14 inch daisy rims, I estimate that two are 80% and two are 50% thread. Size is 185/65-14.
Two rims have a slow leak so have to top em up once a month.
Asking $200 for the set.

1991 parts for sale

feeds@yuku.com (BRG Guy) — Tue, 22 Sep 2009 19:04:26 GMT

Its time to clean out the garage:

1.6 L engine, head and block , original to my car. 189,000 km , long nose crank, engine ran well before swaping for new crate engine.Asking $200

Complete limited slip diff and axels, swaped out for Torsen. Asking $75

Full stock exhaust system and muffler, still in good shape. Offers?

Contact me at 780 940 0570 or reply by email to this post.

Thanks

Bob

Fs My custom turbo kit (300+whp)

feeds@yuku.com (dc2696) — Sat, 19 Sep 2009 14:57:47 GMT

Going bigger.

So I have a custom SS manifold, 45degree top mount. All the flanges were tig welded then planed and seal perfectly without gaskets. Downpipe is SS aswell, 3", and has a v-band on one end.

Turbo has about 10-15k km on it, works great, no smoke, no play, 7psi wastegate spring, comes with a custom SS 2.5 compressor outlet adapter and 3" atp billet alum inlet adapter. .60 coldside/64 hotside. Makes 21psi no questions asked.

I can include...

Mazda Miata Mechanic

feeds@yuku.com (dexter) — Tue, 15 Sep 2009 18:19:17 GMT

We are new to the Miata world and would like to know if anyone could recommend a Miata mechanic in the Kelowna area.

Thanks.... Tom

Looking For right side (passenger) headlight lid (red) 1990 Miata

feeds@yuku.com (El Gordo) — Mon, 07 Sep 2009 09:22:06 GMT

Just purchased a 90 MX-5, missing the passenger side headlight lid; it's a red body colour car. PM me for contact info.

WTB 1994-97 OEM rims

feeds@yuku.com (Redshirt) — Sat, 05 Sep 2009 02:34:55 GMT

Hey all,
I'm hoping someone out there has replaced their OEM rims from their '94-'97 Miata and is willing to sell me the originals.
Let me know, thanks!

WTB - one or two daisies

feeds@yuku.com (herbpin) — Fri, 04 Sep 2009 09:44:38 GMT

I'm looking for one or two 14 inch NA wheels (daisy).

NC winter tire package

feeds@yuku.com (GeeVee) — Wed, 02 Sep 2009 22:11:25 GMT

I have a set of 205/50/16 bridgstone blizzaks mounted on speedy alloy rims with a 5x114 bolt pattern and an offset of +43, rims and tires have only been used for one winter about 7000km. Im asking $850 for them.

http://edmonton.kijiji.ca/c-cars-vehicles-auto-parts-tires-tires-rims-205-50-16-winter-rims-and-tires-W0QQAdIdZ153155510

Thanks
Gary
780-668-9113

FS: Hybrid rx7/miata lsd full swap(everything)

feeds@yuku.com (dc2696) — Mon, 24 Aug 2009 07:26:21 GMT

Wondering if anyone is interested in upgrading their lsd to a rebuildable rx7 clutch type, stronger than the torsens, varying lock-up rates (depending on rebuild strength)

This is what I run in my miata and I love it. Everything you need to upgrade your 6" rearend is included, axles, drivesahft ect.

Will rebuild lsd to desired lock-up strength as well.

$1000

-Dean